Our mechanics bring fast, dependable truck and trailer repair straight to you in Vaughan and the surrounding areas. We diagnose the problem on-site and repair it with OEM-matched parts, so you're back on the road safely.
We run fully equipped mobile units through Vaughan, handling breakdowns right where they happen. From dead batteries and flat tires to brake faults, air leaks, electrical problems, and suspension issues, our technicians diagnose the problem accurately and complete most repairs in a single visit.
A blowout or a flat at highway speed is a safety problem, not just a delay. Our mobile units carry commercial-grade tires, heavy-duty mounting tools, and air equipment, so we can handle flat repairs, plug-and-patch jobs, valve-stem replacements, dual-tire swaps, and trailer tires wherever you're stopped.
Learn More about Tire services
Truck and trailer spindle repairs are our specialty. Instead of towing your trailer to a shop, we bring the press and alignment tools to your yard. Our mechanics inspect bearings, seals, and hub fitment, clean the axle tube bore, and press a new spindle to OEM specs on-site. With spindles stocked for all major axle configurations, most jobs wrap the same day, mostly in under 90 minutes.
Learn More about Axle spindle repairs
We repair truck and trailer suspensions on-site anywhere in Vaughan. From leaf spring and U-bolt replacement to shock and airbag service, our mobile technicians also handle bushing, hanger, and shackle repairs, as well as full torque arm work. We bring the tools and parts to you, so you're not stuck waiting on a flatbed.
Learn More about Suspension and Wheel-end repairs
We connect dealer-level diagnostic software directly to your engine to pull live fault codes. Our units carry the tooling for forced regeneration, NOx sensor replacement, exhaust clamp replacement, DEF system inspection, and regen diagnostics. Derate codes, failed regens, and DEF faults get fixed on-site, without any delays.
Learn More about Truck DPF Services
We perform kingpin replacements, upper coupler inspections, and lock-jaw wear checks on-site. Our mechanics look for worn, cracked, or loose parts that could weaken the connection between your truck and trailer. We also check the fifth-wheel fit to make sure your trailer connects securely and rides safely.
Learn More about Kingpin Repair and Replacement Services
Fully loaded trucks and trailers require more pulling power than a standard tow truck can provide. Our heavy-duty wreckers transport semis, dump trucks, buses, and oversized loads, then haul each one to the repair shop or terminal you choose, secured and damage-free.
Learn More about Heavy-Duty TowingWith over two decades on the road, we provide reliable heavy-duty truck repair for fleets and owner-operators across Vaughan and the GTA. Fleets trust us because we fix the problem right the first time.
From Highway 400 and Highway 407 down to Weston Road, Jane Street, and the industrial blocks off Creditstone Road and Interchange Way, we get to you fast wherever you're parked or stopped in Vaughan.
Our mechanics are certified for heavy-duty trucks and trailers and trained across Class 6, 7, and 8 vehicles, from Freightliner and Kenworth to Peterbilt, Volvo, and Mack. They diagnose and repair to OEM spec right at the roadside, the same standard you'd get in the shop.
We do not compromise on quality by rushing repairs or taking shortcuts. Our trained technicians work efficiently and inspect surrounding components, not just the failed part, to ensure your rig is fully fixed, even on the roadside.
We walk you through what's wrong, what it'll take to fix, and what it'll cost before we start. Nothing gets done until you approve the price. The number we quote is the number you pay, with no surprise add-ons or hidden costs on the final bill.
Roadside repair on a live highway like the 400 or 407 takes more than tools. Our mechanics set up the work zone with proper warning equipment and position the truck to create a barrier from traffic before anyone touches a wrench.
Our technicians accurately identify the problem on-site, usually within minutes of arrival. From no-starts and overheating to air leaks, brake faults, electrical problems, and suspension issues, we pinpoint what's wrong on the spot and start the repair right away.
Broke down in Vaughan? Our mobile mechanics get there with faster dispatch and the right tools to get you moving. Every callout includes high-visibility gear, amber warning lights, PPE, and pylons, all in line with MTO-mandated highway safety protocols.
Our mechanics carry heavy-duty jacks, air tools, wheel chocks, and safety lights, repair or replace the tire, and get the truck rolling before a slow problem becomes a dangerous one. Punctures, blown sidewalls, valve failures, and low-air situations all get handled at the roadside.
We jump-start dead trucks on-site and get you moving again fast. After the boost, we test the battery and charging system to find out what drained it, so the truck doesn't die again, and replace any battery that's failed on the spot.
A blown glad hand, failed air dryer, or seized brake chamber grounds a truck immediately. We carry air line fittings, brake chambers, and slack adjusters on every mobile unit, so we can troubleshoot the fault and get your air system and brakes working again on-site.
A broken axle, a cracked frame, a wheel end that's let go, or a truck that's ended up off the road in a wreck. We handle heavy-duty flatbed towing and recovery. Working with under-lift systems, winches, air lines, safety chains, and straps, we stabilize the truck, get it out of wherever it landed, and bring it to the shop without further damage.
Keep your fleet inspection-ready without pulling units out of service longer than necessary. Our mobile commercial vehicle inspection team serves Vaughan yards, loading docks, fleet lots, and roadside locations, with inspections aligned with MTO safety standards. We know the standards, the road conditions, and the problem areas common to trucks and trailers running through Vaughan's industrial parks and highway corridors.
Schedule an InspectionFull commercial vehicle check against MTO and DOT standards. Lights, brakes, tires, coupling, suspension, and frame are documented and flagged before your next haul or fleet addition.
We pressurize the system and locate every leak. Glad hands, air lines, and air dryer checked and repaired on-site before a failing air system becomes a brake failure.
Leaf springs, U-bolts, bushings, spring pins, and torque arms checked for wear and movement. Heavy freight traffic through Vaughan's industrial corridors wears down suspension hardware faster than most operators expect.
Chamber stroke, shoe thickness, S-cam condition, and slack adjuster travel inspected to Ontario provincial safety standards.
Every marker, stop light, turn signal, and ABS indicator confirmed operational. We trace and repair corroded connectors and cracked harnesses before they cause a roadside fail.
Bearing play, hub seal condition, spindle wear, and wheel stud torque checked on-site. We catch wheel-end problems at the bearing stage, before they turn into a seized hub or a wheel departure on a busy Vaughan corridor.
We dispatch daily into Vaughan and the surrounding area from our shop in Mississauga. Wherever a breakdown leaves you, on the highway or at a loading dock, we give you an honest ETA over the phone and get moving fast to reach you.
8am – 6pm / Mon-Fri
