We bring fast, reliable truck and trailer repair to Markham and the surrounding region. Our experienced mechanics come to you, diagnose the problem on-site, and use OEM-matched parts to get you back on the road safely.
We have fully equipped mobile units running in Markham, handling breakdowns right where they happen. From dead batteries and flat tires to brake faults, air leaks, electrical problems, and suspension issues, our technicians diagnose the problem accurately and complete most repairs in a single visit.
A blowout or a flat at highway speed is a safety problem, not just a delay. We bring commercial-grade tires, heavy-duty mounting tools, and air equipment, handling flat repairs, plug-and-patch jobs, valve-stem replacements, dual-tire swaps, and trailer tires right where you're stopped.
Learn More about Tire services
Axle spindle work usually means a trip to the shop. We do it in your yard instead, bringing the press and alignment tools to you. Our mechanics check the bearings, seals, and hub fitment, clean the axle tube bore, and press a new spindle to OEM spec. We carry spindles for all major axle configurations, so most jobs wrap the same day, sometimes in under 90 minutes.
Learn More about Axle spindle repairs
We repair truck and trailer suspensions on-site anywhere in Markham. From leaf spring and U-bolt replacement to shock and airbag service, our mobile technicians also handle bushing, hanger, and shackle repairs, as well as full torque arm work. We bring the tools and parts to you, so you're not stuck waiting on a flatbed.
Learn More about Suspension and Wheel-end repairs
We connect dealer-level diagnostic software directly to your engine to pull live fault codes. Our units carry the tooling for forced regeneration, NOx sensor replacement, exhaust clamp replacement, DEF system inspection, and regen diagnostics. Derate codes, failed regens, and DEF faults get fixed on-site, without any delays.
Learn More about Truck DPF Services
We perform kingpin replacements, upper coupler inspections, and lock-jaw wear checks on-site. Our mechanics look for worn, cracked, or loose parts that could weaken the connection between your truck and trailer. We also check the fifth-wheel fit to make sure your trailer connects securely and rides safely.
Learn More about King pin services
Fully loaded trucks and trailers take more pulling power than a standard tow truck offers. Our heavy-duty wreckers transport semis, dump trucks, buses, and oversized loads, then haul each one to the repair shop or terminal you choose, secured and damage-free.
Learn More about Heavy duty towingWith over two decades on the road, we provide reliable heavy-duty truck repair for fleets and owner-operators across Markham and the GTA. Fleets trust us because we fix the problem right the first time.
From Highway 404 and Highway 407 down to Steeles Avenue, Woodbine Avenue, and the industrial blocks off Esna Park Drive and Bullock Drive, we know how to get to you fast wherever you're parked or stopped in Markham.
Our technicians are certified for heavy-duty trucks and trailers and trained across Class 6, 7, and 8 vehicles, from Freightliner and Kenworth to Peterbilt, Volvo, and Mack. They diagnose and repair to OEM spec right at the roadside, the same standard you'd get in the shop.
We do not compromise on quality by rushing repairs or taking shortcuts. Our trained technicians work efficiently and inspect surrounding components, not just the failed part, to ensure your rig is fully fixed, even on the roadside.
We walk you through what's wrong, what it'll take to fix, and what it'll cost before we start. Nothing gets done until you approve the price. The number we quote is the number you pay, with no surprise add-ons or hidden costs on the final bill.
Roadside repair on a live highway like the 404 or 407 takes more than tools. Our mechanics set up the work zone with proper warning equipment and position the truck to create a barrier from traffic before anyone touches a wrench.
Our technicians identify the problem accurately on-site, usually within minutes of arriving. From no-starts and overheating to air leaks, brake faults, electrical problems, and suspension issues, we pinpoint what's wrong on the spot and start the repair right away.
Truck stranded in a yard in Markham? Our mobile mechanics get there with faster dispatch and the right tools to get you moving. Every callout includes high-visibility gear, amber warning lights, PPE, and pylons, all in line with MTO-mandated highway safety protocols.
Our mechanics carry heavy-duty jacks, air tools, wheel chocks, and safety lights, repair or replace the tire, and get the truck rolling before a slow problem becomes a dangerous one. Punctures, blown sidewalls, valve failures, and low-air situations all get handled at the roadside.
We jump-start dead trucks on-site and get you moving again fast. After the boost, we test the battery and charging system to find out what drained it, so the truck doesn't die again, and replace any battery that's failed on the spot.
A blown glad hand, failed air dryer, or seized brake chamber grounds a truck immediately. We carry air line fittings, brake chambers, and slack adjusters on every mobile unit, so we can troubleshoot the fault and get your air system and brakes working again on-site.
Some jobs are beyond a roadside repair. A broken axle, a cracked frame, a wheel end that's let go, or a truck that's ended up off the road in a wreck. We handle the tow and the recovery together. Working with under-lift systems, winches, air lines, safety chains, and straps, we stabilize the truck, get it out of wherever it landed, and bring it to the shop without further damage.
Keep your fleet inspection-ready without pulling units out of service longer than necessary. Our mobile commercial vehicle inspection team serves Markham yards, loading docks, fleet lots, and roadside locations, with inspections aligned with MTO safety standards. We know the standards, the road conditions, and the problem areas common to trucks and trailers running through Markham's industrial parks and highway corridors.
Schedule InspectionFull commercial vehicle check against MTO and DOT standards. Lights, brakes, tires, coupling, suspension, and frame are documented and flagged before your next haul or fleet addition.
We pressurize the system and locate every leak. Glad hands, air lines, and air dryer checked and repaired on-site before a failing air system becomes a brake failure on the 404 or 407.
Leaf springs, U-bolts, bushings, spring pins, and torque arms checked for wear and movement. Heavy freight traffic through Markham's industrial corridors wears down suspension hardware faster than most operators expect.
Chamber stroke, shoe thickness, S-cam condition, and slack adjuster travel inspected to Ontario provincial safety standards.
Every marker, stop light, turn signal, and ABS indicator confirmed operational. We trace and repair corroded connectors and cracked harnesses before they cause a roadside fail.
Bearing play, hub seal condition, spindle wear, and wheel stud torque checked on-site. We catch wheel-end problems at the bearing stage, before they turn into a seized hub or a wheel departure on a busy Markham corridor.
We run a daily dispatch to Markham, covering the city and the surrounding areas. Wherever a breakdown leaves you, whether on the highway or at a dock anywhere in Markham, we give you an honest ETA over the phone so we can reach you as soon as possible.
8am – 6pm / Mon-Fri
