Fast, on-site truck and trailer repair for breakdowns anywhere in Burlington, from fleet yards to major highways. Our heavy-duty mechanics are equipped with the right tools, hardware, and OEM-grade parts.
We bring your truck back to life, no matter where you are in Burlington. Dead batteries, air leaks, electrical issues, axle damage, or suspension failure. We diagnose and fix the problem right on the spot.
A worn or damaged spindle can't be repaired. it has to be replaced to restore correct OEM geometry and bearing fitment. Rather than towing your truck or trailer thorough the entire city, we bring all needed tools to your location. With spindles stocked for all major axle configurations, we complete most jobs the same day, sometimes within 90 minutes.
Learn More about On-site axle repairs
We handle suspension repairs on-site for both trucks and trailers anywhere in Burlington. Our experienced mechanics repair all types of issues with leaf springs, air suspension components, shock absorbers, equalizers, hangers, U-bolts, and bushings, with all the required parts and heavy-duty tools on hand.
Learn More about Suspension and Wheel-End Services
We handle kingpin repairs on both steering axles and trailer couplings. Our mechanics inspect the pin, axle, bushings, upper coupler, and lock jaws for any play, uneven wear, and misalignment to make sure your truck leaves tight, straight, and ready for the next load.
Learn More about Kingpin Repair and Replacement
Our mechanics bring commercial-grade tires, heavy-duty mounting equipment, and air tools straight to your location in Burlington. We plug and patch punctures to commercial standards, replace valve stems and dual tires, and check and correct tire pressure before sending you back on the road.
Learn More about Tire Services
Leaks, worn linkage, low or burnt fluid, bad sensors and switches, and clutch adjustment, all fixed without pulling the transmission. Park somewhere level and safe and we'll come to you, same day in most cases.
Learn More about Minor transmission repair
We inspect the brake shoes and replace worn or damaged spider plates on-site with OEM-grade parts for truck and trailer axles. Our work goes beyond basic removal and installation. We ensure the bushings fit properly, reassemble all hardware, and clean the axle surfaces before completing the job.
Learn More about Spider plate replacementBurlington sits at a crossroads of constant freight traffic, and we have serviced it for over two decades with fast response, precise tooling, professional repairs.
We service every corner of Burlington, from the QEW and Highway 403 interchange through Harvester Road, Appleby Line, Guelph Line, and Walkers Line to the Mainway and South Service Road industrial belt. We reach you fast.
Our certified technicians bring years of hands-on experience to every call, from routine repairs to roadside emergencies. We know heavy-duty trucks and trailers inside out, across all makes and models
Every part we carry is matched to your unit's original spec, so nothing gets replaced with a compromise. That means no aftermarket guesswork, no waiting on an order, and no repeat visit to finish the job.
We provide a full breakdown of the fault, the repair required, and the cost before any work begins. Repairs proceed only once the quote is approved, and the final invoice matches it.
A live highway is not a safe place to work without preparation. Before any repair begins, our mechanics set out warning equipment and position the service truck to shield the work area from passing traffic.
If a truck needs towing instead of a roadside fix, we handle it ourselves and bring it to our own shop, so you're not left waiting on a subcontracted tow or a second call to find out what's wrong
Is your truck down somewhere in Burlington? We cover the whole city, from the QEW to the industrial areas off Appleby and Harvester. We come to you fast, make the area safe, read the problem, and either put you back on the road or move the truck if it can't run.
Turn the key and get nothing but a click? We'll boost you and get you moving. But if the battery's actually done, a boost only lasts until the next shutdown, so we test it right there. If it won't hold, we replace it on site and you leave with a truck that starts again tomorrow.
Locked out of the cab? Our technician opens it on location, without prying, forcing, or leaving a mark on the door. It's a matter of minutes, and considerably faster than tracking down a locksmith who handles commercial vehicles.
Some faults don't tell you what they are. Air systems, electrical trouble, the kind of problem that leaves a rig sitting for no obvious reason, we work through it where the truck is parked and fix what can be fixed on the spot. Plenty of breakdowns never need to see a shop.
On-site roadside fixes are only possible in certain cases. For a broken axle, a cracked frame, wheel lockup, or a truck stuck in mud, prompt heavy-duty towing and recovery are required. We handle towing and recovery using under-lift systems, winches, air lines, safety chains, and straps to stabilize the truck and transport it to the shop without further damage
Our mobile commercial vehicle inspection team visits yards, loading docks, fleet lots, and roadside locations, with inspections aligned with MTO safety standards across Burlington. We know the road conditions and common problem areas for trucks and trailers moving through the Burlington industrial corridors.
Schedule InspectionFull commercial vehicle check against MTO and DOT standards. Lights, brakes, tires, coupling, suspension, and frame are documented and flagged before your next haul or fleet addition.
We pressurize the system and find every leak in it. Glad hands, lines, fittings, and the air dryer are inspected and repaired where your truck is parked, so a slow leak never becomes a low-air warning at highway speed.
Heavy freight through Burlington's industrial corridors wears suspension hardware faster than most operators expect. We check leaf springs, U-bolts, bushings, spring pins, and torque arms for wear and movement, and replace what's past spec on-site.
Every marker, stop light, corroded lamp boards, turn signal, and ABS indicator confirmed operational. We trace and repair corroded connectors and cracked harnesses before they cause a roadside fail.
We measure chamber stroke, shoe thickness, S-cam condition, and slack adjuster travel against Ontario safety standards, then adjust or replace whatever falls outside them on-site.
Bearing play, hub seal condition, spindle wear, and wheel stud torque checked on-site. We catch wheel-end problems at the bearing stage, before they turn into a seized hub or a wheel departure on a busy Burlington corridor.
Keep your operation moving with our dependable mobile repair coverage across Burlington and Halton. Our team responds with clear timing, professional service, and the experience needed to handle your truck and trailer repairs at your location.
8am – 6pm / Mon-Fri
