Our Trailer Wheel Alignment Services
Semi Trailer Wheel Alignment
Semi-trailer axle alignment is one of our most demanding services. We do full semi-trailer axle alignment using computerized equipment that accurately set toe, camber, and thrust angle across all axles. You also get a before-and-after printout showing the exact alignment corrections.
Tandem Axle Trailer Wheel Alignment
When one axle on a tandem trailer shifts, both axles fight each other. We measure and adjust axles separately, so that they run parallel and in the same direction. This corrects tracking issues, uneven tire wear, and ensures your trailer rolls straight under load.
Single Axle Trailer Wheel Alignment
Our trailer wheel alignment specialists check axle squareness by measuring the wheel’s alignment with the frame at the front and rear of the wheel. We then verify toe and camber, and inspect leaf spring hangers and axle mounting hardware for wear, cracks, and loose fasteners.
Boat Trailer Wheel Alignment
We align both single and tandem boat trailers. Whether you are trailering a small fishing boat or a large cabin cruiser, properly aligned axles mean stable, predictable handling on every drive to the water.
Vehicles We Service
How Our Trailer Alignment Process Works
Trailer Suspension Alignment and Frame Inspection
Before any adjustments, we do a complete walkthrough of your trailer’s suspension. We closely check leaf springs for cracked leaves, shifted center bolts, or pack fatigue. We also test spring hanger brackets for elongated bolt holes and weld failures, U-bolts and axle seats for looseness or corrosion, and equalizers, torque arms, and bushings for wear. We finally inspect trailer frame for any bends, twists, or collision damage that affects axle geometry.
Precision Measurement
To find out if an axle is out of square, our specialists use a plum bob or laser to mark the exact center of each wheel hub on the floor. They then use a long tape measure to check the distance from the front hitch (the coupler or kingpin) to the marks for each axle. This reading reveals exactly how many inches an axle has shifted.
Axle Adjustment
If your trailer has adjustable suspension, our trailer axle alignment specialists loosen the adjustment bolts and slide the axle forward or backward until it is square. For trailers with bent axles, we use specialized hydraulic tools and chains to straighten the axle back to the correct camber and toe specifications, verified with precision measuring equipment. When the trailer frame has shifted or sustained damage, we perform trailer straightening first to align it against a true, square frame.
Final Torque and Verification
Once the axles are all set, our mechanics torque all hardware to manufacturer specifications. We then perform a final check to confirm whether the trailer tracks straight, the thrust angle is correct, and to make sure there is no pull to either side.
Why Choose Axle Spindle For Your Trailer Alignments
Same-Day Trailer Axle Alignments
We get most routine alignment jobs done under 90 minutes. Full multi-axle alignments and heavy-duty semi-trailer alignments can take more than 2 hours, depending on the damage.
20+ Years of Trailer Repair Expertise
Our top-tier certified trailer wheel alignment technicians don’t just straighten the axle. We take everything seriously, including trailer suspension inspection, frame squaring, and tire wear analysis, ensuring a complete quality service check.
12+ Integrated Services Under One Roof
If the alignment inspection detects a brake problem, a worn spring pack, or a hub seal that needs attention, we take care of it during the same visit.
No Appointment Needed
Get expert trailer inspections and wheel alignment at Mississauga’s top truck and trailer repair shop. Call or drop by today.
How Much Does Trailer Alignment Cost in Ontario?
Trailer alignment costs in Ontario typically start at $150 for a single axle, $250 for a tandem, and $350+ for a multi-axle semi. While these are standard rates, the final trailer wheel alignment cost can increase if your trailer has seized bolts from road salt, bent hangers, or worn bushings that must be replaced before the alignment can be finished. Call us for a specific quote on your trailer type. We will give you a straight number before any work begins.
Our Service Areas
Based in Mississauga, Axle Spindle Repair provides trailer alignment services for operators and fleet yards across the Greater Toronto Area and Southern Ontario freight corridors. Our service areas include:
Your Trailer Deserves Precision Alignment. Let us Fix That!
Do not let a misaligned axle eat through your tires, burn your fuel, or turn into a safety problem on the highway. At Axle Spindle Repair, we have been putting trailers back in line for over 20 years, and we will do the same for yours.
